Skip to main content
All CollectionsWarehouse ManagementWarehouses
Lines (Packing lines)
Lines (Packing lines)

(Version 1.0)

Updated over 5 months ago

What is a Line?

Lines refer to packing stations in a warehouse.
​
To configure the Lines, navigate to

☰ > Warehouse > Lines

Configure a Pack Line

Create a Line

To create a new line, follow the steps 🪜:

  1. click + New Line .

  2. Add a Name for the line.

  3. Select the Warehouse.

  4. (Optional) To configure a pack line specific to a Client, select the client from the drop-down menu. This means that only orders from the selected client can be packed on the line. To use the line for all the clients, skip this step.

  5. Click Save .

Note:

Each pack line should have an associated printer. To set up printers for a specific line navigate to Line Settings.

Edit a Pack Line

To edit a line, follow the steps 🪜:

  1. click Actions .

  2. Select Edit.

  3. Update the Name, Warehouse, or Client.

  4. Click Save .

Remove a Pack Line

To remove a line, follow the steps 🪜:

  1. click Actions .

  2. Select Remove.

⚠️ Note:

Removing a line will make it inactive. Any inactive lines cannot be recovered and activated back again.

Line Settings

The Line Settings allows associating the line with printers to print out the labels, documents, and cards.

To access the line settings, navigate to

☰ > Warehouses > Settings > Line Settings

Add a printer for a line

Note:
Before configuring line settings, ensure the following steps are completed:

  1. Connect the Printer:

    • Ensure the printer is connected to the device.

    • Install the required printer drivers on the device's operating system.

    • Configure the printer in the operating system's printer settings.

  2. Install JSPrintManager Version 7:

To add printers for a line, follow the steps 🪜:

  1. Click + Add Line .

  2. Select a line from the Warehouse Line drop-down.

  3. Select a Default Label Printer, Default Document Printer, and Default Card Printer from the list of connected printers to the device.

  4. Click Save .

Edit or Delete Line Settings

  • To update the line settings for a pack line, click Actions > Edit.

  • To delete the line settings for a pack line, click Actions > Delete.

Did this answer your question?